roller shutter repair singapore shutters are purposeful and practical when they function without issues. It isn't so great feeling when your shutter stuck halfway between opening & closing or simply the door decline to open altogether. This denotes an issue - probably an issue with the door. Let's have a look at some of the common issues in electric roller shutter doors, so you can find a quick-fix solution to overcome such concerns

Filth in tracks:

Have a glance at the tracks of the roller shutter! Can you notice any dirt or indications of wreckage that might be forcing the door to jam? Well, that is a common issue with roller shutters, if filth obstructs the tracks, the door will fix and struggle to close or open. Clean the runners, take away any dirt you can find and observe if that enhances the condition. Otherwise call a professional!

Hot Motor:

Are you using the door very constantly? Well, if you are using the door quite regularly, there is a good possibility that the motor has been overheated. Allow the motor to be cooled down and see how the door functions after this process. If the condition is same, then you might have a bigger problem on your hand. You may need the helping hand of a professional.

Stuck door:

Does your door commence to open and then stop suddenly halfway during its cycle? This could be an issues sourced by the proximity sensors. Look out for indications of damage, or check for grime that has been trapped. A quick clean is what your door needs to work properly again.



Indications of damage:

Buckles & dents in doors are quite often the source of a bigger issue, so have a look at the condition of the door. Can you notice any indication of visual dent? Does the door seem alright or has it received some sort of trauma? If this's the case, then you may have to substitute the damaged section.

So, these are the basic things you can perform on your own without calling a professional. However, when bigger issues arise, for example - roller shutter is functioning in the reverse direction of the switch or roller shutter is catching against the back of pelmet box - you need to ask for professional help in your area. Since professional have experience and latest instruments in their hand - they can better perform this job than us. So, better hire a professional!








This article is exclusively written by Eric - a professional supplier of quality roller shutter in Melbourne . Have a peace of mind by installing our Melbourne electric shutter.